Nintendo 64 with Gamebox 64HD HDMI and Borti4938 N64RGB in Smoke Transpartent Black Housing

0 Review(s) Write a Review

Your Price: $399.95

Questions about this item? Be the first to ask here.

Availability: In Stock.

Quantity

Nintendo 64 with Gamebox 64HD HDMI and Borti4938 N64RGB

in Smoke Transparent Black Housing!

Console Features -

Gamebox System 64HD

The 64HD HDMI digital out mod from Gamebox systems adds modern HDMI connectivity to your retro N64 console, plus a whole range of additional features to give you an enhanced gaming experience. The mod primarily helps you to attach your Nintendo 64 to a modern TV, but it does so in a way that provides the very best possible picture, tapping directly into the motherboard for a digital signal, rather than using the traditional analog AV out.

Supported Resolutions:

- 1080i60 (1920×1080 interlaced) - Works best with NTSC consoles.
- 720p60 (1280×720 progressive, Default Mode) - Best compatibility for PAL consoles.
- 480p60 (720×480 progressive)
- 240p60 (1440×240 progressive, use with component converter for PVM/CRT screens)

Scaling Modes:

Additional Features

OSD Hot Keys

Open OSD:

L Trigger + R Trigger + DPad Down + C Down

Enter 240P Mode:

L Trigger + R trigger + DPad Left + C Left

Cycle Resolution:

L Trigger + R Trigger + DPad Up + C Up

Electrolytic Capacitor Replacement

After many years of use, electrolytic capacitors can start to lose their capacitance and thus their ability to perform as intended. This can have varying effects on performance (none good). The electrolyte, paper and aluminum foil in the capacitor degrade physically and chemically over time. Aging capacitors can cause a wide range of issues and in extreme cases can leak electrolytic fluid onto the PCB (again, not good). All electrolytic capacitors on the motherboard of this console have been replaced, so the console is ready to rock for another 20+ years of service.

Ultrasonic Cleaning

Over time, dirt and dust can start to collect inside a video game console. This is very common, with some consoles being more prone to accumulating debris than others. With its open vents on the top and sides, the Nintendo 64 is one of these consoles. Once something finds its way in, it rarely finds it way out. That being said, this console has a new aftermarket green shell, and the motherboard, shielding, heatsyncs, and cartridge slot were all run through an industrial ultrasonic cleaner to remove any dirt, dust or residual flux. This means you will be getting an extremely clean console inside and out!

New Thermal Pads

Thermal pads can wear out over time reducing their efficiency, raising temperatures, and putting unwanted strain on their corresponding ICs. The thermal pads in this console were all replaced with Arctic TP-3 premium performance pads. Based on silicone and a special filler, TP-3 outperforms high-performance pads, especially when height differences of closely spaced chips typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite extremely low hardness.

Items Included -